Home › Vehicles › Hilux N70 (2005-2015)

Hilux N70 (2005-2015): budget drawer and canopy layout guide

Building drawers or a sleeping platform in a Toyota Hilux N70 (2005-2015) double cab on a budget? Here are the real ute tub measurements we've got on record, a rough ply cost in NZD and AUD, and some simple layout ideas that work in this vehicle. Measure your own before you cut. Liners, trims and model years all change the numbers.

Open the planner with the Hilux N70 (2005-2015)

Ute tub dimensions

Tub floor length1520 mm
Width between wheel arches1100 mm
Max floor width1515 mm
Tub depth450 mm
Tailgate opening widthnot yet measured
Floor height from ground850 mm
Variant: Extra cabtub length 1805 mm, tub max width 1515 mm, width between arches 1100 mm, tub depth 450 mm
Variant: Single cabtub length 2315 mm, tub max width 1520 mm, width between arches 1100 mm, tub depth 450 mm
Payloadnot yet measured
Kerb weightnot yet measured

"Not yet measured" means we haven't found a trustworthy source. We don't guess.

Cheapest ply cost estimate

A basic twin drawer unit sized to this ute tub would be about 1080 mm wide (arch width minus 20 mm clearance) and 1200 mm long, 300 mm tall. That works out to roughly 3 sheets of 12 mm ply for the carcass and drawer boxes, plus 1 sheet of 18 mm (17 mm in AU) for the top.

MarketCheapest ply we foundPly cost
NZBunnings NZ Tigerply 12mm NZ$57.50/sheet, Bunnings NZ Tigerply 18mm NZ$89.90/sheetabout NZ$262
AUBunnings AU CUSTOMply 12mm A$46.00/sheet, Bunnings AU 17mm non-structural (in-store only) A$71.40/sheetabout A$209

This is ply only: drawer runners, screws, glue, carpet and hinges are extra. Prices are 2400×1200 non-structural sheets, checked 15 Oct 2026, and shelf prices vary by store. The sheet count includes about 15% for offcuts and mistakes.

Budget layout ideas

Help fill the gaps: measure your rig

Common questions

What size is the Hilux N70 (2005-2015) ute tub?

From our sourced data: tub floor length 1520 mm, 1100 mm between the wheel arches. Always measure your own vehicle before cutting, as tubs, trims and liners vary.

How much does it cost to build DIY drawers for a Hilux N70 (2005-2015)?

Roughly NZ$262 or A$209 in ply for a basic twin drawer unit (3× 12 mm sheets plus 1× 18/17 mm), using the cheapest non-structural sheets at Bunnings in Oct 2026. Runners and hardware are extra.

Will a standard drawer unit fit in a Hilux N70 (2005-2015)?

A unit up to about 1080 mm wide fits between the arches with some clearance. Wider units need to sit above arch height.

← All vehicles